Industrial Self Cleaning Filter For Cosmetic Treatment Solutions
Introduction For Industrial Self Cleaning Filter For Cosmetic Treatment Solutions
From the inlet, liquid enters the main filter body and passes through the filter element from inside outward. Impurities deposit on the inner wall of the wedge wire element. A reduction motor powers the scraper to achieve continuous impurity removal. The rotation of the element against stationary scrapers allows cleaning without flow interruption. The separated impurities accumulate at the bottom and are automatically discharged periodically through the drain outlet.
Technical Parameters For For Industrial Self Cleaning Filter For Cosmetic Treatment Solutions
| Filter Model |
Filter Inner Dia. |
Filter Height |
Thickness |
Filter Area |
Filtration Precision |
| HT-D219 |
250mm |
1000 |
3 |
0.2 |
50microns |
| HT-D273 |
300mm |
1450mm |
4mm |
0.5 |
| HT-D325 |
350mm |
1600mm |
4mm |
0.6 |
| HT-D400 |
450mm |
1700mm |
6mm |
0.7 |
| HT-D450 |
500mm |
1750mm |
6mm |
0.9 |
| HT-D550 |
600mm |
1850mm |
6mm |
2.0 |
| HT-D800 |
850mm |
2000mm |
6mm |
2.5
|
Working Principle For Industrial Self Cleaning Filter For Cosmetic Treatment Solutions
1)Automatic Cleaning —Mode 1 (Timed Cycle)
Motor:Operates and stops according to a preset schedule.When running,the motor drives the shaft to rotate,allowing the scraper to remove impurities accumulated on the filter cartridge .After the set running time is reached,the motor stops working.After the preset stopping time is reached,the motor starts running again .This cycle continues automatically.
Drain Valve:Opens and closes according to preset schedule; The loop control is identical to the motor loop control.
2)Automatic Cleaning —Mode 2 (Differential Pressure Start)
The device is equipped with pressure sensors at both the inlet and outlet to monitor the inlet pressure and outlet pressure.When the pressure difference between the inlet and outlet reaches the preset value,the device automatically transitions from the circulation state of Mode 1 to this mode;the motor activates, and the discharge process begins immediately.
3)Manual Cleaning:
The operating status of the motor and drain valve is controlled entirely via manual switches by worker.
Feature For Industrial Self Cleaning Filter For Cosmetic Treatment Solutions
1. High filtration accuracy, the minimum accuracy can reach 20 microns.
2. No disposable consumables are produced, saving consumable costs and environmental protection treatment costs.
3. High degree of automation, no need for manual cleaning, dual control of pressure difference and time, to achieve full automation of cleaning
4. Closed filtration to prevent leakage of hazardous materials, which is conducive to safe and efficient production.
Application Industry For Industrial Self Cleaning Filter
water treatment, paper making,petrochemical, sanitary, paint, ink,grease, food and beverage, etc.
Product Tags:
|
|
Industrial Self Cleaning Filter For Cosmetic Treatment Solutions Images
|
